MJF100 counter
MJF100 Features:
1. Dual LED four digits display
2. Counting range”-1999~9999.setting range 1-9999
3. Dry contact input,NPN transistor input,Quadrature 90ºinput
4. Input frequency from 1 to max 5000HZ and configurable
5. Normal counting/batch counting/totalizing counting
6. Various reset mode and relay reset delay function
7. 12 VDC 100 mA auxiliary power source for sensor
8. Up or down counting mode selectable
9. 85~265 Vac or 24 VAC/VDC power source
10. Power failure retention on/off configurable
11. Decimal point display,no decimals to max 3 decimals
12. Relay reset delay range 0.01 sec~99.99 sec
13. Multiplier available for easy meter counting application
14. Quadrature input for encoders
15. Optional features:
RS485 Modbus RTU communication
OP2/OP3/OP4 OUTPUT optional
24VDC/AC source optional,standard source is 85-265VAC
2 Alarm options,1 alarms is standard as OP1
CODE
MJF 100(48X48 mm,width*height) □-□-□-□-□ 1 2 3 4 5 | ||
1 Function designation for AU1 terminals at the back | N | No functions for AU1 terminals |
A | AU1 terminals will be sued as RST and GATE(count holding) purpose | |
2 | AU1 terminals will be sued as SP2 output(OP2) | |
3 | AU1 terminals will be sued as BA1 batch count output(OP3) | |
4 | AU1 terminals will be sued as SU1 totalizing count output(OP4) | |
2 Function designation for AU2 terminals at the back | N | |
3 Function designation for AU3 terminals at the back | N | |
4. Power supply | B | 85-265VAC |
D | 24VDC/VAC | |
5 RS-485 Communication option | N | No communication |
M | RS-485 Modbus communication | |
关闭返回